Swellable Water Bar Manufacturer :
Swellable Water Bar Description :
Swellable Water Bar - Conventional Pre-formed water bars have not been user friendly and often failed because it hindered the concreting because
of its bulky size in the shutter and the nailing of the water bars to the shutters to keep them in position, punctured the water-bars and made them
ineffective. Swellable Water Bar,keeping this in view Deesawala Rubber Industries introduces user friendly and most effective Hydro Swellable water
bar for constructions joints which swell in the centre of the construction joint post construction under pressure when it comes in contract with
the water from leakages, effectively blocking the leakages.
Hydroswell is a neoprene based hydrofillic construction joint water bar which expands to 250% of its original volume in the construction joint
when it comes in the contract with water post construction. Swellable Water Bar is user friendly,It only needs nailing in position at the center of
the construction joint just before the subsequent pour.
Swellable Water Bar Installation
Make sure that the concrete is dry, clean the surface and make it smooth, free from any loose material .
Just before the subsequent lift of the concrete is poured nail Deesawala Rubber at the centre of the construction joint at an interval of 30
centimeter C/C .
When one piece of the Hydroswell has to be joined with the subsequent one at the end of the length do not over-lap Hydroswell but lay it close
to the end in a butt joint.
Hydroswell is supplied with a water retardant coating to guard against premature expansion or the swell of the product during construction. It
is still recommended that the product is not used during rainy spells .
Swellable Water Bar Advantages:
Swellable Water Bar is user friendly,It only needs nailing in position at the center of the construction joint just before the subsequent pour.
Expanded Swellable Water Bar is highly flexible and absorbs all deflection and movements in the structure during and post construction.
Swellable Water Bar is highly chemical resistant and resistant to hydrocarbons as well.
It is effective against potable water, hard water and saline water as well.
It can be safely installed with nails.
Swellable Water Bar Specifications:
Available Size: 25 x 20 mm;
Free expansion in distilled water at least six times the initial volume without loss of cohesion of mass Density : 1.4 gms/CC
Hardness: 50 HAD Swelling 300%
Mass greater than 1.10 Kg / m. Pressure of swelling greater than 600 KPA after 48hours.
Pressure of swelling less than 100 KPA after 6 hours.
Stability in salt solutions, and aggressive resistance to inhibition of calcium and magnesium ions, Resistance to hydrostatic pressure, under
both continuous immersion and wet / dry cycling.
Swellable Water Stop
Swellable Water stops is an active sodium bentonite/butyl rubber-based water stop designed to stop water infiltration through the cast
in place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. It also fills the cracks
and pores on the concrete.
Usage of Swellable water stop
Used for concrete joints, and intersections of old and new concrete in the construction of pools, foundations, tunnels, manholes, retaining walls,
garages, curtain walls, water deposits, water purification facilities and pipe penetrations into above-mentioned constructions.
The surface must be clean and dry. It must not be applied to wet, frozen, greasy or dusty surfaces, and under wet weather conditions.
Firmly press the entire length of it onto concrete. In vertical and overhead applications, press for at least 15 seconds for perfect adherence.
Make sure water stop covers all parts of the surface, especially for surfaces which are not perfect in shape.
Use swell-fix primer when necessary.
Put together coil ends side by side or end to end; do not overlap. Remove silicon paper and pour concrete carefully and indirectly.
Swellable Water Stop Price
Deesawala Rubber offers a wide range of sizes from 10 x 10 upto 50 x 50 and also manufacturers the same as per customer requirements with very
Item Code: RX-101
Production Capacity: 5 Tonnes
Delivery Time: Ready Stock
Packaging Details: 30 meter corrugated box
||Concrete Filling and Jointing
||As per Order Quantity
||Rectangular section elastomeric strips
|Deesa SWB Pro 20 SW10:
||10 mm x 20 mm
|Deesa SWB Pro 20 SW20:
||20 mm x 20 mm
|Deesa SWB Pro 20 SW25:
||25 mm x 20 mm
|(Other sizes on request)
|Unrestrained volumetric Expansion ratio:
||Up to 500%
|Application temperature Range:
||–5°C to 50°C
|Service temperature Range:
||–30°C to 70°C
|Hydrostatic Pressure Resistance*:
||SW10: 30 metres
|SW20: 50 metres
|SW25: 70 metres