Best PVC water Stopper - DEESAWALA RUBBER INDUSTRIES

DEESA FLEX PVC Water Stops are flexible Plastic strips which provide a physical barrier to Water at concrete joints, mostly in basements, Water retaining structures like Water tanks, Swimming pools, structural foundations & other below ground level constructions.  Waterstops are also termed as Water Bars, seals construction joints. A typical waterstops have two identical half on both side of a central bulb. These additional extensions are provided with the aim of increasing path length for water entering behind the edge of water stop.

Compounding of PVC Water Stopper

Waterstops are manufactured at Dessawala Rubber Industries from Anti-Ageing customized plastic compound with  PVC as a base polymer and exhibiting required properties like High Elasticity & Tensile Strength, Immune to Corrosion, Excellent weather resistant, Unaffected by acids, alkalis, metals salts and other chemicals, Lower water absorption, Withstand high Hydrostatic pressure, Can bear shocks of heavy turbines, Earth quakes, Floods.

Application in construction Industry

  • PVC Waterstops act as sealant at RCC Masonry concrete joints & prevent any seepage of water in or out through joints.
  • PVC Water stoppers withstand expansion or contraction movement at joints and take care of any deflection or displacement arising due to change in temperature, differential settlement of foundation, Geo disturbances causing Seismic forces like earth quack, thus eliminating danger of cracks.

Best PVC water Stopper
Buy PVC water Stopper

Selection of appropriate Waterstop:

  1. Ribbed Type– multipurpose waterstop design, used where differential settlement of poured concrete is expected and a firm grip in concrete is desired.
  2. Dumbbell Type– Greater variation in temperature causes expansion or contraction of joints, Dumbbell type waterstop is suggested for these sites.
  3. Kicker (Surface) Type:these are externally placed and are use where embedded types can not be used due to interference of steel reinforcement.

Installation procedure:

Water Stoppers are tied to steel frame work through eyelets by means of small wires (same being depicted in the adjacent figure), certain metal clamps meant to grip the water stop seal and keep it in proper position.

Firstly one half of the waterstop is embedded in the concrete leaving the second half extended. Second half is also embedded leaving the centre bulb free for expansion and contraction movements.

 Area of Application:

  • Public Utilities :Bridges,  Road Embankments, Tunnels, Water Tanks, Swimming Pools, Water Filtration plants, Swage Plants, Clarifiers, Dams, Canals, Aqueducts, Reservoirs, Irrigation Projects Cooling Towers.
  • Building: Basements, Foundations Slabs, Masonry Joints, Terraces, Retaining Walls, Overhead & Underground Water Tanks, Skyscraper.
  • Industries:Chemical Plants, Fertiliser Steel, Waste Treatment Plants, Thermal & Hydro Power Stations, Atomic Reactors, Shipyards & Docks.